UVISTAKE 7205-PMF

TECHNICAL DATA & INFORMATION - Click to view complete technical

UV Curing, Low Outgassing, Urethane Staking Compound

PRODUCT DESCRIPTION

UVISTAKE 7205-PMF is 100% solids, thixotropic, one component, premixed frozen, electrically insulating, urethane system designed for the attachment and staking of electrical/electronic components mounted on printed circuit boards. This system provides an excellent combination of flexibility and strength for demanding applications where toughness is required for the management of thermomechanical stresses.

UVISTAKE 7205-PMF will become tack free when exposed to the proper UV light radiation. The staking compound will fully post cure in exposed and shaded areas in 14 days at 25°C and 50% relative humidity, as an alternative, the post cure for the staking compound in both exposed and shaded areas may be accelerated with low to moderate
heat.

KEY FEATURES AND BENEFITS

  • Multicure mechanism for complete cure in shaded areas underneath components
  • Good flexibility for reduced stress in the encapsulation of sensitive glass-bodied components
  • Meets NASA condensable volatile requirements for high vacuum environments
  • Highly reversion resistant for good physical stability under high heat and humidity environments
  • Low Tg (-60°C) for excellent low temperature cycling, storage and performance
  • Excellent adhesion to plastic/metal components and substrates. Adheres well to itself for multicoat and repair applications
  • Packaged in syringes for convenient dispensing. Plungers available for hand operation or pneumatic--type syringes for automated dispensing.
  • No TDI, no toxic solvents, no free acrylic acid for safety
  • Low modulus version available as 7205LM-PMF
  • For a more thixotropic version, use UVISTAKE 7208-PMF
  • Complete companion UV product line available:
    • UVIKOTE 7503-PMF - low viscosity, sprayable version for circuit board coatings of ≤3 mils
    • UVIKOTE 7504-PMF - 100% solids for thicker applications like back-side solder joint encapsulation
    • UVIKOTE T-100 Thinner - non-photosensitive, non-aromatic
    • UVIKOTE S-100 Stripper - low viscosity removal of cured coating/adhesive for repair operations
    • UVIKOTE S-200 Stripper - thixotropic version for localized removal of cured coating/adhesive